Aguzzo EZY FIT 200mm x 1400mm Double Vertical Square Tube Bottom Wired Heated Towel Rail Polished Stainless Steel

This Aguzzo Polished Stainless Steel Vertical Heated Towel Rail has bold square rails and a unique compact design that ensures it fits into your bathroom - even if you're tight on space. It easily fits 4 standard towels on its two large vertical bars to provide high heat contact to your towels so they are warm and dry in minimal time. Aguzzo only uses quality thick 304 stainless steel to ensure your towel rail will last.

Note: Vertical heated towel rails are heated within safety limits and provide ambient heat. Towels and robes will be warmed where they are in contact with the heated rails. The unit is not designed to heat a space or room.

• Contemporary - the Aguzzo vertical heated towel range is a bold geometrical design with clean straight lines that complement any square style bathware ranges such as the Aguzzo Montangna range

• High Surface Area - The large 200mm x 1400mm size means more surface area and more heating for you towels

• Flexible install - You have the option to attach the rail to the wall and simply plug the power in, or conceal the wiring through the wall bracket by hard wiring into the wall (electrician required to connect). See install instructions below

• Efficient - Only 54 watts power consumption

• Safe - full electrical safety compliance and licensing with with AS/NZ: 60335 and c-tick requirements. The latest in heating technology provides an even surface heat - the bars are dry and not filled with liquids or oils, so you can even dry delicate garments. The surface can heat to 55 ºC, being hot but not scalding - see attached instructions for more safety information.

• Polished finish - A timeless polished stainless steel finish, fully resistant to heat and moisture.

• Waterproof - IPX5 rated to withstand water sprays and splashes - a great choice for the bathroom

Key specifications

• Dimensions: 200mm width; 1400mm height; 180mm depth (from wall to hook)
• Rails: Vertical rails are 30mm depth x 30mm width
• Power: 240V - 54 watts. Includes 1.5m black power cord and plug
• Installation: Can be plugged-in or concealed wired - see installation instructions below
• Control: Must be controlled by wall switch or programmable timer (sold separately)
• Wiring: Wired from the Bottom left pillar only; can be exposed or concealed.
• Surface temperature: up to 55 º C
• Water-proof rating: IPX5 (independently tested to withstand water sprays and splashes)
• Compliance: Electrical safety standards AS/NZ 60335 and C-tick

Installation: Choose to "Plug In" or "Conceal Wire"

You have two installation options:

(1) Plug In - Simply attach to wall and plug in the power cord to a power point

(2) Conceal Wire - Have your electrician hard wire the provided cord and EZY-FIT plug to power source and suitable switch or timer (sold separately). When you are ready to install simply plug the product into the EZY-FIT plug, which is concealed inside the wall bracket) and attach product to wall!