A basin mixer is one of the most essential components in any bathroom, controlling both water temperature and flow with a single handle. Choosing the right basin mixer ensures efficiency, ease of use, and a seamless aesthetic that complements your overall bathroom design.

At Sydney Home Centre, we offer a premium selection of basin mixers from top brands like Fienza, Gareth Ashton, Nero Bathrooms International, and Modern National.

Whether you need a compact mixer for a vanity basin, a high-rise mixer for a countertop basin, or a wall-mounted mixer for a sleek minimalist look, this guide will help you find the perfect option for your space.

What is a Basin Mixer?

A basin mixer is a single-handle tap that blends hot and cold water through one spout, allowing precise control over temperature and flow.

Unlike traditional tap sets, basin mixers provide convenience and a modern aesthetic in bathroom design.

Simple & Modern Design – Enhances the bathroom’s visual appeal.
Effortless Water Control – Adjust both temperature and pressure with a single handle.
Space-Saving Solution – Ideal for small and large basins alike.

Types of Basin Mixers Available

There are several types of basin mixers available, each catering to different needs and aesthetics.

Countertop basin mixers, available in both standard and compact sizes, are ideal for vanities and basins with pre-drilled tap holes. They are shorter in height, making them perfect for small or standard basins, and are available in sleek modern or classic designs.

High-rise basin mixers, on the other hand, are designed for above-counter (vessel) basins that require extra height clearance. They offer a striking modern aesthetic with an elegant water flow and pair well with stone or ceramic countertop basins.

Lastly, wall-mounted basin mixers are mounted on the wall above the basin, creating a clean and modern look while freeing up counter space for a clutter-free vanity area. These mixers require in-wall plumbing, making them ideal for new builds or major renovations.

    Can You Use a Basin Mixer for a Bath?

    No, basin mixers are not designed for baths. Basin mixers have a smaller flow rate suited for handwashing, while bath mixers have a higher water flow to fill a tub efficiently.

    Use a dedicated bath mixer for a bath to ensure faster filling and correct water pressure.
    ✔ If you want a uniform look, choose a matching bath mixer and basin mixer from the same range.

    How to Change a Basin Mixer Tap

    How to Remove an Old Basin Mixer Tap

    1. Turn Off the Water Supply – Shut off the valves under the sink.
    2. Disconnect the Water Hoses – Use a wrench to loosen and remove the hot/cold water connections.
    3. Unscrew the Fixing Nut – Remove the mounting bracket securing the mixer.
    4. Lift Out the Old Mixer – Clean the area before installing the new one.
    How to Fit a New Basin Mixer Tap
    1. Insert the Mixer – Place the new mixer into the basin tap hole.
    2. Secure with a Fixing Nut – Tighten it underneath the vanity using a spanner.
    3. Connect the Water Hoses – Attach the hot and cold lines securely.
    4. Test for Leaks – Turn the water back on and check for proper flow.

    Tip: Use plumber’s tape on fittings to ensure a watertight seal.

    It is recommended to use a licensed plumber when installing your tapware to not void the warranty.

    Frequently Asked Questions (FAQ)

    How Long Does a Basin Mixer Last?

    High-quality mixers, made from solid brass and featuring ceramic disc valves, typically last between 10 to 15 years, while cheaper models made from plastic or low-grade metal may wear out in about five years.

    Can I Use a Kitchen Mixer as a Basin Mixer?

    It is also important to note that kitchen mixers cannot be used as basin mixers because they usually have higher flow rates and a different design.

    How Do I Maintain My Basin Mixer?

    To maintain your basin mixer, it’s recommended to clean it with mild soap and water to preserve the finish, avoiding abrasive cleaners that can scratch or dull the surface. Additionally, it’s a good idea to check connections yearly for any leaks or signs of wear.

    Recently viewed